Livestock Farming Facility Wastewater Treatment System

Japan

For the livestock farming facility for fattening pigs (Kagoshima Prefecture), we delivered two units of the multi-disc screw press dehydrator MDC-series for sludge dehydration, and six units of the submersible air mixer TAR-series for aeration and agitation.
The MDC-series has no sludge feed tank. The unit equipped with φ350 screws was highly evaluated for its ability to handle large processing volumes, enable continuous automatic operation with simple controls, and minimize labor required for sludge dehydration.
The TAR-series is an energy-saving aeration and agitation system capable of both aerobic and anaerobic treatment. It achieves high oxygen transfer efficiency with low power consumption, operates quietly underwater, and maintains a hygienic environment with minimal spray and odor.
Both products have been widely adopted by livestock farming facilities throughout Kagoshima Prefecture, and their proven track record and long-standing reliability led to their selection for this project.
Tsurumi Manufacturing offers a wide range of water treatment equipment and submersible pumps required for livestock farming sites, enabling us to provide comprehensive, integrated solutions.

Multi-Disc Screw Press Dehydrator

The main unit of the multi-disc screw press dehydrator contains a multi-disc mechanism where ring-shaped "fixed discs" and "movable discs" are alternately arranged at a regular clearance around a "screw shaft." The main unit consists of a "support frame" that supports the multi-disc structure and a "dam plate" at the end of the screw shaft.

  • Multi-Disc Screw Press Dehydrator
    MDC-Series

Submersible Air Mixer

Tsurumi's original downward 4-directional discharge design spreads flow across a wide area. It effectively homogenizes the wastewater by creating conditions that make it hard for sludge to precipitate and settle on the tank bed.

  • Submersible Air Mixer
    TAR-Series

Submersible Air Mixer TAR-Series (Japanese)

Products

Multi-Disc Screw Press Dehydrator Model : MDC
MDC-353CS [ Number of Units : 2 units, Treating Capacity : 108〜216kgDS/h, Screw Shaft : φ350 x 3 ]
Submersible Air Mixer Model : TAR
100TAR45.5 [ Number of Units : 6 units, Air-inlet Bore : 100mm, Motor Output : 5.5kW, Air Supply Rate : 1.5〜10m3/min, Oxygen Transger Rate : 12〜34kg・O2/h ]

Back to Index